
 AUTOCAD RELEASE 11 ADI 4.1 PROTECTED MODE DISPLAY LIST DRIVER FOR S3 86C911
 ---------------------------------------------------------------------------
The ADI 4.1 driver is used for AutoCAD Release 11, AutoShade 2.0
and 3D Studio 1.0.

Resolutions supported with 0.5 MB VRAM display memory:
 800 x 600 x  16 colors
1024 x 768 x  16 colors
 640 x 480 x 256 colors

Resolutions supported with 1 MB VRAM display memory:
 800 x 600  x  16 colors
1024 x 768  x  16 colors
 640 x 480  x 256 colors
 800 x 600  x 256 colors
1024 x 768  x 256 colors
1280 x 960  x  16 colors
1280 x 1024 x  16 colors



DRIVER INSTALLATION FOR USE WITH AUTOCAD RELEASE 11:

	1.  Copy driver (RCP911.EXP) to a convenient location.
	    The file ACAD_R11.BAT can be used to copy the driver by first logging
	    onto the desired drive and directory and typing
		       A:ACAD_R11

	2.  Set the environment variable "DSPADI=" to point to the
	    driver file.

	    For example:

	SET DSPADI=C:\ACAD\DRIVERS\RCP911.EXP

	If desired, this command can be placed in the AUTOEXEC.BAT file.

	3.  Set Acad device to "PADI 4.0/4.1" in the AutoCAD display device
	    configuration menu.

    4.	Select the desired mode from the list of available modes in
	the ACAD configuration menu.



DRIVER INSTALLATION FOR USE WITH AUTOSHADE 2.0:

1. Delete "\shade2\shade.cfg"

2. Add environment variables to "\autoexec.bat":
 a. "SET SHADE=\SHADE2\RMANSUPT"
 b. "SET DSPADI=\S3\ADI\RCP911.EXP" (or where ever it is)
 c. "SET RDPADI=\S3\ADI\RCP911.EXP" (or where ever it is)

3. Reboot machine.

4. Run "shade" from "\shade2" directory.

5. Select pointing device.

6. Select "P386 Autodesk Device Interface display driver"

7. Choose a mode NOT marked as "Disabled".

8. Select "P386 Autodesk Device Interface rendering driver"

9. Choose a mode NOT marked as "Disabled".

10. Answer "YES" 3 (three) times-
 a. YES, display and AutoShade rendering devices share a single
    screen.
 b. YES, display and RenderMan rendering devices share a single
    screen.
 c. YES, FLIP SCREEN does require a redraw.

11. Select a rendering hardcopy device.

12. Quit, and the configuration will be saved.



DRIVER INSTALLATION FOR USE WITH 3D Studio 1.0:

1.  Change the following 3 lines in the 3DS.SET file (the 3DS.SET file
is located in your 3DS directory).

change line 123 to read:
	DEFAULT-DISPLAY = "RCPADI"

change line 138 to read:
	MAIN-DISPLAY = RCPADI

change line 145 to read:
	MATERIAL-DISPLAY = RCPADI

2. Delete "\3ds\3ds.cfg"

3. Add environment variables to "\autoexec.bat":
   "SET RCPADI=\S3\ADI\RCP911.EXP" (or where ever it is)

4. Reboot machine.

4. Run "3ds" from "\3ds" directory.

5. Configure Main Display.

6. Configure Materials Editor Display.

7. Quit, and the configuration will be saved.

